A.G.S Graffiti Removal
Using high-pressure water-cleaning equipment combined with non-hazardous Graffiti removing chemicals, it is possible to entirely remove graffiti from any type of porous or non-porous surface without harming the underline facade.

A.G.S - Protection Against Graffiti
Anti graffiti protection protects solid, absorbent and painted surfaces against graffiti attack and other contamination such as stickers, chewing gum, birds' droppings and traffic film build up.

The protective coating is brushed or sprayed on to the area requiring treatment. It forms a transparent wax film that prevents penetration of paint, dirt, pollution etc. Importantly, all A.G.S. coatings allow the moisture to escape. This ensures that the protected structure can breathe thus preventing corrosion and discolouration. Once applied, graffiti can be easily removed from the protected surface. All A.G.S. coatings have a guaranteed minimum life of five years.

A.G.S - Graffiti Protection
The immediate and important advantages are:

It is a water-based micro-permeable silicone free wax emulsion, which allows the treated surface to fully breath.

Warranted to contain NO solvents. Graffiti paints are normally removed from the protected surface with a simple hot water pressure wash.

Can be applied immediately following graffiti removal. This results in considerable savings in working time and makes the overall application still more cost effective.

Provides a 'dry' invisible surface without any contrast between protected and unprotected surfaces. It is also resistant to Ultra-Violet light and will not alter surface colour.

Is neutral (PH7) and biodegradable, making the coating 'friendly' and safe for the operatives, the surface material and environment.

Has excellent all round surface protection coating against traffic-film and general soiling, inhibiting the growth of moss and algae and drastically reducing maintenance costs.

SPECIFIER'S NOTES
Tested to BS476 Pt6 (Fire Propagation) & Pt7 (Surface Spread of Flames), given Class 'O' rating. Meets with L.U.L. code of Practice tests for smoke emissions. Passed MOT Building Research Establishment 'Freeze-Thaw' test. Compatible with surfaces impregnated with Silane or Siloxane material. Retains original form in climate accelerated weathering tests corresponding to 10 years. Non-toxic to fish or bacteria. Only dissolved in water at a temperature of 85 degrees centigrade. Permeability test and laboratory reports available upon request.

Terms and conditions apply

Top